Shipping terms for this product

On stock        On stock at the moment: 10 items

Select quantity:   0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100

The ROLLEI DIGIBASE CN 200 PRO is an un-mask colour negative film, with a nominal sensitivity of ISO 200/24°. His unique qualities and many-sided application possibilities revolutionise the offer of monchrome colour films. He can be used universally for nearly all professional tasks. Thanks to his fineness of grain and the latitude of sensitivity of practically one f/stop underexposure, originate succinct admissions an unusual sharpness and tonal value reproduction.

Features

• un-mask colour negative film – high-releasing, highly sensitive panchromatic negative film, for colour and B&W prints suitable.
• on account of the filmbase, especially for the digital use over
• scanner suitable, works not so precipitously as a slide film;
• the un-coloured film base makes easier the setting work in the darkroom;
• big latitude from +/- one f/stop, with high exposure reserve for the application with all lighting conditions and weather terms.
• special coating for the improvement of the qualities in the camera;
• use with daylight, as well as with artificial light, unconditionally possible.
• polyester base with high breaking strength and resistance to tearing;
• archive-firmly LE 500;
• the big contrast area the reproduction of the most different tonality;
• very good resolution capacity, very fine grain and very high sharpness, as a basis for negatives with an excelent quality;
• really antistatic, above all, after the development;
• contains a special layer for the reduction of Newtonian rings;
• extra hard protective coatings on both sides of the film to the avoidance of scratches;
• NO CURLING – layer for excellent plan position of the film.

Important handling notes for films with a synthetic film base:

The emulsion is coated onto a transparent synthetic base providing excellent long-term and dimensional stability.

This films has to be loaded in the camera and unloaded in subdued light. Before and after exposition always store the films in the black light-tight film-container. Not following these advices can cause light infiltration through the base material to the exposed pictures. Rollfilms: Please take care in handling the 120 size films in keeping the film-roll tight with two fingers after breaking the unexposed adhesive label to avoid that the film is rolling to "spring off". The same procedure should be followed after taking the roll film out of the camera. The exposed film should be kept compellingly again in the black light-tight rollfilm-container.