My Account  |  Cart Contents



Film processing

ars-imago products

Polaroid Originals


New products

Second hand






Alternative Process




Camera Bags

Camera straps









Analog specials


Bergger FB Warm Tone - Variable CB Style Ivory 40.6x50.8cm 25sh (SALE)


Price Fr. 171.00  Fr. 120.00
Desired Quantity
Product code BGCBS4050EXP
Stock 2 pieces on stock
(limited units)


A premium-weight (280g) semi-glossy warm tone, variable contrast (VC), fibre-based enlarging paper for use as Variable CB.
Paper based: semi-glossy ivory.

PRESTIGE VAR. CB STYLE is a double weight, variable contrast photographic paper with a warm black image tone. It comes on a heavy ivory fiber-base stock of 300g per sqm and gives superb results. Slightly matt surface.PRESTIGE VAR. CB STYLE can produce contrast grades ranging from soft to exceptionally hard due to an emulsion incorporating both blue and green sensitivities. With a multicontrast filter set, contrast grades from 0 to 5 are available in half-step increments.

A red safelight (such as one fitted with a Wratten 1A filter) is recommanded. With a 15 watt bulb used direct illumination, minimum working distance is 1,5 meters (5 feet). Safelight exposure longer than 2 minutes may lead noticeable fog. It is a good idea to test for safelight fog time-to-time.

PRESTIGE VAR . CB STYLE can be exposed with any enlarger or printer light source. As with all VC papers, be aware that some older types of cold-light tubes may normally require more yellow filtration. Also, note that exposure times depend upon which filter is in place. For exemple : if 8 sec. is correct for filters number 0, 1 and 2 ; then filter 3 will require 9 sec. and filters 4 and 5 : 27 sec.

Process in any good paper developer at 20C (68F) for 1,5 to 2 min. with continuous agitation. BERGGER Ecco and BER-98 developers works particulary well with this paper.

Stop bath
An acid stop bath is optional but recommanded. It quickly stops development by neutralizing alkali. This also helps extend fixer life. Dilution : 45 cc of 28% acetic acid in 1 litre of water. Treatment time : 15 sec. or 20 to 30 seconds if water rinse.

Fixing (maximum time : 10 minutes)
Treat in a conventional sodium thiosulfate fixer for a minimum of 5 min. at 20C (68C). Normal fixer capacity is 1,5 sqm/litre. A two bath fixing method (at 2,5 min. per bath) may be used to avoid under-fixing. When the first bath is exhausted, replace it with the second bath and mix a fresh bath second bath . With ammonium thiosulfate ( rapid ) fixers, treat for 30 to 45 seconds only, then give a thorough pre-washed for 5 min. Next, treat with a wash-aid (see WASHING , below) with frequent agitation for 10 min. before transfering to a final wash.

The use of a wash aid (such as Kodak Hypo Clearing Agent) will reduce your wash time and increase the efficiency of your washing. As well, it will help guarantee the permanence of your photograph. Wash PRESTIGE in running water at rate fast enough to completely change once every 5 minutes. Wash time is 1 hour at 20C (68F) or 30 min. if a wash aid has been used.

To effect even and rapid drying, you may use a weeting agent as a final rinse. Excess water should be removed from the surface of prints with a clean sponge or squeggee. Prints may then be dried in dust-free air on drying screens or in a clean photo-blotter.

PRESTIGE VAR. CB STYLE may be toned, retouched, spotted and mounted using normal methods.


ars-imago GmbH
Badenerstrasse 211
CH-8003 Zürich

Fon: +41 44 461 18 49

Tuesday - Friday: 11:00 - 19:00
Saturday: 11:00 - 17:00
Monday + Sunday: Closed

23.12.2018 + 24.12.2018:
11:00 - 17:00

About us
Business conditions
Privacy & Cookie Policy
Follow us on facebook
Follow us on twitter
Follow us on instagram

Raiffeisenbank Zug
Rathausstrasse 10
CH-6341 Baar

Clearing: 81454
Konto: 56574.73
IBAN: CH6881454000005657473

Place of business
ars-imago GmbH
Ägeristrasse 5
CH-6300 Zug
VAT: CHE-114.611.015
ZAZ-Konto: 5966-2

Deutsch Italiano English Franais